C W2

“High precission subwoofer.”

 

The low distortion subwoofer

 •   Transducers  2x 15" ND Cone 4" voice-coil
   
 •   SPL max  140dB
   
 •   Directivity  Omni directional
   
 •   Bandwidth  38-120Hz ±3dB |  32-120Hz ±6dB
   
 •   Weight  57kg | 126lbs

The subwoofer for the demanding ears!

 

The construction is classic, 2 × 15′′ – and the design of the highest quality.

What makes the C W2 special is, on the one hand the high- capacity long-excursion speakers with 100mm voice coil and fiber-reinforced membrane, and on the other hand, the construction of the waveguide for frequencies in the range of 40Hz: the diameter of the bass-reflex openings is particularly large, which results in a high degree of efficiency and low distortion levels due to minimal losses at the vent openings.

The slim format of the C W2 makes it especially suitable for applications where little space is available on the stage, or where it must be integrated into a wall niche or a stage- portal.

One C W2 with a connecting pole (M20) in between provide a stable base for a C 12 and C 22 full-range loudspeaker.

The recommended controlled amplifiers are KS TA 2D or
TA 4D with an F MOD or D MOD digital controller module. They provide the required performance, response correction and safe protection for the speaker. When using two input channels, a mono subwoofer operation of

the C W2 is possible. The low frequency signals of both channels are added and routed via controller to the power stage. The stereo signals are still available for full-range and mid/high loudspeakers at the XLR M outputs.

All functions of the DSP controller can be remote-controlled and monitored via Ethernet. The most important parameters can be changed directly on the unit via a rotary knob and display.

The sturdy protective grille extends over the entire front and is largely "invisible" with acoustic foam. A transport protection cover is available as an accessory. The surface has a PU coating that can withstand almost any stress. There are 4 large swivel castors on the back for easy transport.

As in all KS AUDIO loudspeakers, the cabinet construction is made of birch multiplex and has a very durable PU coating. The multigrip handles on the sides provide easy handling. M20 threaded stand flange, stacking feet, a solid speaker grill with foam are further features of this quality product.

Applications

 

High-quality sound reproduction

Premium fixed installations in opera houses, theaters and clubs

Hi-end live music in small venues

Related products.

 
TA 2D - 2 Channel FIRTEC™ DSP controlled amplifier

TA 2D - 2 Channel FIRTEC™ DSP controlled amplifier

TA 4D - 4 Channel FIRTEC™ DSP controlled amplifier

C 12 - Single 12” and single 1.75” HDSP full-range loudspeaker

C 22 - Single 12” and single 4” HDSP precision full-range loudspeaker