CPD 1203

The KS CPD 1203 is a special design speaker created for specific task in the CPD Series especially for speech reproduction with very high intelligibility in an acoustically difficult environment.

There are many applications in which the CPD 1203 can be used such as small live event, media room, conference, convention or as a delay system in a large PA system.

As the mid / high system in conjunction with subwoofers such as the
CPD B2, the CPD 1203 gives you a full-range small PA system.

12 nos. integrated amplifier in bridge mode with DSP controller allows a vertically varying dispersion angle in a wide range of the direct sound field.

Inside the baffle are 12 nos. integrated broadband 3′′ drivers. The membranes are protected by a grille over the entire front, which is covered with acoustic foam.

The housing is made of impact-resistant synthetic material which is stylish, durable and weather resistance. It also has good acoustic performance and is easy to install no matter the shape of the back wall and at any angle. 2 × M6 threaded mounting points, recessed sockets as well as various accessories such as the ball-joint wall brackets are available for facilitate the installation.

The CPD 1203 is optimized by computer. It is possible to change both the vertical dispersion angle and the main axis of the sound projection. This enables the speaker mounted vertically on an architecturally unobtrusive location while the audience area may just below it. A subsequent accurate alignment to the speakers in an inaccessible position is also possible. Presets for different kinds of sound characteristics can also be retrieved such that a broadband pleasant sounding setting for music playback at medium levels or/and extremely powerful full range for voice communication or public address are possible.

With the high quality components, the best materials and precise processing determine the quality of the CPD 1203.

The connection sockets for power and digital audio signal are recessed so that the cable connector cannot interfere with any mounting situation.

The power supply can also be by an external 24VDC power supply with UPS – thus an emergency alarm is effortlessly achieved.